Back |
Rocker Mini BMX

Rocker 3+ Vader Freecoaster Mini BMX Bike

£299.95 SAVE £40.00
In stock
Please select
No, thank you
Mini BMX Assembling
Yes, please
Please select
No, thank you
Rocker 12mm Plegs Mini BMX Pegs
12mm - Black
12mm - White/Purple
12mm - Black/Purple
12mm - Black/Silver
12mm - White/Green
Please select
No, thank you
Rocker Socks
Yes, please
Please select
No, thank you
Rocker Snap Back Cap
Please select
No, thank you
Rocker RKR Keyring
Yes, please
Add-on items
Mini BMX Assembling
Mini BMX Assembling (1 pcs)
No, thank you
+ £10.95
Rocker 12mm Plegs Mini BMX Pegs
Rocker 12mm Plegs Mini BMX Pegs (1 pair)
No, thank you
+ £13.55
Rocker Snap Back Cap
Rocker Snap Back Cap (1 pcs)
No, thank you
+ £4.35
1 pcs
1 pcs
2 pcs
3 pcs
4 pcs
5 pcs
6 pcs
7 pcs
8 pcs
9 pcs
  Save for later
From same brand

The Rocker+ edition comes with an improved fork with reduced clearance for much easier foot jams. The frame has been tweaked with an angled seat clamp and micro drop outs for a super clean looking back end.

This Rocker Mini BMX comes in a special Freecoaster version, which makes it to roll backwards whilst keeping the pedals in the same position.

The Rocker3 has been under the knife for a solid 1 kg reduction in weight compared to the Rocker 2. The most serious Rocker Mini BMX to date and also the most durable. Built for higher speed and bigger tricks. Rocker 3 features a drive sprocket with 9 teeth and a 28 teeth front sprocket.

The tall gearing allows for high speeds and thus much higher airs. With higher airs comes higher impacts. Hence the upgraded 3-piece crank which takes far more abuse. A short back end makes spinning a whole lot easier and the addition of the street pro tyres will give you more confidence to throw bigger tricks. Comes with precision sealed wheel bearings for lower rolling resistance.

  • Weight reduced hi tensile steel frame
  • Taper fork & bar
  • Top load stem
  • Thread less forks
  • 10" x 28" bars
  • Plastic BMX pedals with matching kraton rubber grips
  • 28/9 gearing
  • 9T semi sealed driver
  • Precision sealed cartridge bearings
  • 3 piece forged steel cranks
  • Fat padded seat
  • Steel 3 piece wheels with patented Rocker rear wheel hub and 9t driver
  • Pneumatic rubber 10" soft compound chunky tyres
  • Chrome/coloured KMC chain


  • The bike is delivered 80% assembled. All parts must be tightened before use.
  • When using a freecoaster hub you will find that it takes a while longer before you start gaining momentum when pedalling. This is called "slack" and can be adjusted in 4 different configurations for much slack to very little. All this can be done without removing the wheel.
Total height:
Freecoaster, Sealed bearings
Bar height:
10" (25.4cm)
Bar width:
28" (71.1cm)
Bar material:
Chrome steel
Frame Top Tube:
12" (30.5cm)
Frame standover height:
6.3" (16cm)
Chainstay length (Centre):
8.46" (21.5cm)
Headset type:
Integrated 1 1/8"
Frame material:
Hi-ten steel
Headtube length:
Gear ratio:
Axle diameter:
Stem type/Length:
Top load
Crank Length/Type:
120mm, Three-piece
Crank material:
Wheel diameter:
Wheel type:
Air tyre
Seatpost Length:
Pedal material:
Max rider weight:
Partly assembled
Fits with
Really amazing thank you SkatePro! Strong and great quality!
Keegan Ellis (Bournemouth)
Rating: 5 of 5!
Show all 14 reviews